| Corporate offices In Ft. Worth, TX 1-800-827-0711 www.texasrefinery.com |
Independent Sales Contractor Michael Bialecki Selling the products of Texas Refinery Corp. Click here to email me directly. |
To contact me please call 410-858-8290 Fax 1-866-259-6187 |
| Home | Products | Trc History |
|
SYNTEX 2700 added protection in the toughest jobs. |
|
| SYNTEX 2700 comes in two weights. The first is an SAE 75W/90 and the second is SAE 80W/140. The synthetic base stock has a very low pour point plus a high viscosity index. As a result these heavy duty extreme pressure gear lubricants offer superior low temperature performance as well as providing increased gear life due to extremely high film strength. When SAE 75W/90 is used in manual transmissions, shifting gears in sub-zero weather is much easier. If gears are heavily loaded, take a look at the 85 pound Timken OK Load for the SAE 80W/140. |
Extended Drain-Interval Capabilities
Has extended drain-interval capabilities, as opposed to petroleum-type gear lubricants. Since SYNTEX 2700 is treated with additives to prevent and control oxidation, rust, corrosion, and wear the gear components receive longer life and reduced wear. This means longer gear life and longer lubricant life. The high and low temperature performances of these products exceed those of conventional SAE 80W/90 and SAE 90 hypoid gear lubricants.
Good Demulsibility
Has good demulsibility to promote rapid separation of water. The water usually comes from condensation caused by temperature variations in the gear boxes. There is no way to prevent moisture from entering but Texas Refinery Corp.'s SYNTEX 2700 promotes separation from the water.
Withstands Heat
Stands heat better than most petroleum oils. This means the need for make-up oil is less with SYNTEX 2700 compared to most straight petroleum gear lubricants. If gears "freeze up" because of cooked gear lube from high operating temperatures, SYNTEX 2700 can help eliminate the problem.
Made From Synthetic Base Stocks
Made from synthetic base stocks giving it extremely low pour points and channel points. The product is used in all kinds of heavy duty equipment both on and off-road. SYNTEX 2700 is also used in many industrial applications particularly where either cold temperatures or hot temperatures make petroleum products unsatisfactory.
Ensures Lubrication Flow
Ensures lubrication flow to pinion bearings, differential channels, and upper gears. The ability to protect gears and bearings in a wide range of loads, speeds, and temperatures make this product extremely useful.
SYNTEX 2700 is heavily loaded with high performance chemistry. Anti-rust, anti-corrosion, anti-foam, anti-oxidation, and extreme pressure anti-wear additives are all present in higher quantities than in conventional GL-5 petroleum gear lubricants.
Resists Foaming
Fights a common problem (foaming) by using superior anti-foam additives. In addition, itcontains more anti-foam chemistry than conventional GL-5 petroleum gear lubricants. Foaming allows metal to metal contact, heat build-up, and eventually gear box failure. Eliminates ordinary foaming problems and reduces foaming in the toughest applications or situations.
| Typical Characteristics |
Table 1
|
| Code # |
|
|
|
| ISO Grade |
|
|
|
| SAE Grade |
|
|
|
| AGMA Grade |
|
|
|
| Viscosity, cSt |
|
||
|
|
|
|
|
|
|
|
|
|
| Viscosity, SUS |
|
||
|
|
|
|
|
|
|
|
|
|
| Viscosity, cP |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Viscosity Index |
|
|
|
| Channel Point, °F. |
|
|
|
| Pour Point, °F. |
|
|
|
| Flash Point, °F. |
|
|
|
| Foam Test |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| API Gravity, 60/60° F. |
|
|
|
| Density, lbs./gal., 60° F. |
|
|
|
| Copper Strip Corrosion |
|
||
|
|
|
|
|
|
|
|
|
|
| Thermal Heat Test, 300° F. |
|
|
|
| Timken OK Load |
|
|
|
| Demulsibility |
|
|
|
|
|
| Code |
|
|
| Property |
|
|
| Brookfield Viscosity, cP | ||
|
|
|
|
|
|
|
|
|
|
|
|
| Kinematic Viscosity, cSt | ||
|
|
|
|
|
|
|
|
|
|
HANDLING INFORMATION: For safe handling of the product, read the Material Safety Data Sheet (MSDS).