| Corporate offices In Ft. Worth, TX 1-800-827-0711 www.texasrefinery.com |
Independent Sales Contractor Michael Bialecki Selling the products of Texas Refinery Corp. Click here to email me directly. |
To contact me please call 410-858-8290 Fax 1-866-259-6187 |
| Home | Products | Trc History |
|
SYNTEX 2000 for reduced operating temperatures. |
|
| SYNTEX 2000 is made specifically with Spicer (Dana), Fuller (Eaton) and Rockwell manual transmissions in mind. It is just the right viscosity for Fuller and Spicer manual transmissions calling for motor oil or mineral oil gear lubes and the newer specs calling for synthetic transmission lubes. SYNTEX 2000 is an SAE 50 as called for in several transmission applications. It is the perfect weight and has outstanding cold weather properties for all season performance. |
Made From Synthetic Base Stocks
Made from synthetic base stocks allowing an extremely low pour point - - - which means increased lubricant flow at cold temperatures. A pour point of at least -40° F. and a flash point of 455° F. means SYNTEX 2000 is an excellent all-climate, year-round type product.
Cold Weather Capabilities
The cold weather capabilities allow easier gear shifting, less drag, better fuel economy, and less gear wear because vital transmission parts are lubricated quickly. Sub-zero fluid flow means vital transmission ports are lubricated quickly.
Highly Stable
In addition, when SYNTEX 2000 is exposed to severe heat, oxidation, and sheer conditions, the product is highly stable. It provides exceptional high temperature lubrication for extended drain intervals. The superior all-season lubricating properties mean extended drain intervals and the virtual elimination of the need to change fluids due to weather conditions.
Commonly Used In Fuller And Spicer Transmissions
Commonly used in Fuller and Spicer transmissions in place of motor oils or mineral transmission lubricants. The synthetic formulation protects better than straight mineral oil or motor oil both in high heat and cold temperatures. SYNTEX 2000 is approved for extended warranties.
Excellent Additives
Heavily treated with excellent additives. Anti-rust, anti-corrosion, anti-foam, anti-oxidation, and anti-wear chemistry coupled with superior synthetic base stocks make this product a super performer under extreme conditions of heat, cold, and everything in between. It provides superior protection to synchronizers, bearings, and gears. The additives promote longer transmission and lubricant life as well as reduce component wear.
Compatible With Oil Seals
SYNTEX 2000 is very compatible with oil seals. It is not detrimental to the seal materials. The synthetic base stocks do not form deposits on the seals. Many petroleum products leave deposits on seals. Deposits around the seal can cause elastomer losses which result in premature leakage.
| Code # | 8435 |
| ISO Grade | 220 |
| SAE Grade (J306) | 50 |
| Viscosity, cSt (ASTM D-445) | |
|
|
18.0 |
|
|
138.2 |
| Viscosity, SUS (ASTM D-2161) | |
|
|
92.2 |
|
|
695 |
| Viscosity, cP (ASTM 2983) | |
|
|
1,250 |
|
|
3,850 |
|
|
11,650 |
|
|
24,250 |
|
|
45,250 |
|
|
270,000 |
| Viscosity Index (ASTM D-2270) | 154 |
| Pour Point, °F. (ASTM D-97) | <-40 |
| Flash Point, °F. (ASTM D-92) | 455 |
| Foam (ASTM D-892) | |
|
|
Pass |
|
|
Pass |
|
|
Pass |
| API Gravity, 60/60° F. | |
|
|
23.0 |
| Density, lbs./gal. | 7.63 |
| Copper Strip Corrosion | |
|
|
|
|
|
Pass |
|
|
Pass |
Approved for 750,000 mile warranty coverage at Eaton and Rockwell transmissions. Meets or exceeds Rockwell, International 0-81 and Eaton Transmission Division 121-R3 specifications.