TIRESEAL^® II P.G.

BIODEGRADABLE CONTAINS ANTI-FREEZE REDUCES DOWNTIME WILL NOT HARM TIRES OR RIMS FOR OFF-ROAD TIRES EASY TO USE

A few words that describe this product are Biodegradable, Safe, Effective, and Economical. This product is a spin-off of TIRESEAL® , a product with years of experience behind it. This product is just as effective as its older brother and has the additional benefits of being biodegradable.

Biodegradable

Has been specially formulated to have no annoying fumes or vapors and is not harmful to the skin. It can be easily washed off skin and out of clothing.

Should the need arise, it can be easily and simply washed out of a tire with normal water. No special solvents or cleaners are required to completely remove it from the inside of a tire.

Biodegradable product often needed by owners, operators, tire dealers, and of course, the tire wrangler. Product biodegradability is important in that is prevents contamination of water supplies now and later.

In addition, all toxicology data have been checked on the raw materials and no problems have been found to indicate any toxicity. That is good news for people handling the product, as well as people (such as equipment operators) who may come in contact with TIRESEAL^® II P.G.

Contains Anti-Freeze

Extreme weather conditions do not affect its performance. The complex liquid solution contains a very effective anti-freeze, which has been especially designed to alter the formation of ice crystals at subfreezing temperatures. Naturally, as the temperature drops, the viscosity will become heavier than usual; however, after the first few rolls of the tire, it returns to its normal consistency.

Reduces Downtime

When used as a preventative maintenance product, it helps reduce cost and inconvenience normally experienced when a flat occurs. When protected with this product, a piece of equipment and the operator continue to earn their keep instead of sitting idle, waiting for a tire to be repaired . . . the cost of which can be extraordinary! Not only is this particular piece of equipment still doing its job, but crews and equipment following are not delayed either.

Will Not Harm Tires Or Rims

Chemically inert, that is, it is inactive. There is nothing to attack or damage any part of the tire. It does not contain petroleum solvents or other compounds that would prove harmful. Actually extends a tire's life by absorbing the heat caused by friction in the tread area, holding the heat in its liquid solution and transferring this heat to other parts of the tire. Also, it helps rejuvenate the rubber in a tire, and keep it pliable, extending the tire's life.

Many tires have been destroyed when the rim has welded itself to the tire, due to rust and heat. With TIRESEAL^® II P.G., this problem is virtually eliminated. The liquid solution contains rust inhibitors, which helps keep the rim from rusting and welding to the tire. Contains no ingredients that may pit or corrode metal.

For Off-Road Tires

The uses of TIRESEAL^® II P.G. are as varied as the many different types of equipment to be found, from the largest of earth moving equipment tires to farm tractor tires and even golf cart tires. This product is not to be used in tires which are installed on vehicles utilized for over-the-road service at speed exceeding 45 miles per hour. Any product inside a tire could cause an imbalance problem at high speeds. Also the sealing ability could be impaired by high speeds. Speed will create a centrifuge effect, which could hinder TIRESEAL^® II P.G.'s sealing ability in a tire.

Easy To use

To install, rotate the tire to where the valve stem is between the ten o'clock and the two o'clock position. Remove the valve core and allow the air to escape. Pump in the appropriate amount of product, then replace the valve core and air the tire up to the proper pressure. TIRESEAL^® II P.G. is now ready to perform!

Can be left in tires for an almost unlimited time. Unlike some tire sealants, it is not a "quick-fix" designed to simply get your down the road, then be washed out once the puncture is properly repaired. Stops leaks by actually forming a plug, eliminating the loss of air from the tire. There is no immediate need to have the flat fixed . . . as a matter of fact, you probably won't even know it occurred!

Due to its exclusive formula of tiny fibers suspended in a complex liquid solution, TIRESEAL^® II P.G. can help reduce up to 50% or more of all flats caused by punctures in the tread area and rim or bead leaks, thus providing equipment with increased efficiency and production.

 

TIRESEAL® II P.G.

Product Code #1099

Quantities listed below are based on careful studies of usage under many conditions. It has been found there are times when either a little more or a little less TIRESEAL® is needed, depending upon operating circumstances.

Industrial Pneumatic Type Tires

Off-Highway Types

Size	Pints per tire	Size	Pints per tire
2.80/2.50-4	1	7.50-10	2
4.10/3.50-4	1	9.00-10	3
3.40/3.00-5	1	7.50-15	3
11.00/4.00-5	1	10.00-15	4
6.90/6.00-6	1	11.00-16	5
12.00/11.00-6	3	7.50-20	4
15.00/6.00-6	2	9.00-20	4
16.00/11.50-6	3	10.00-20	5
3.40/3.00-7	1	11.00-20	6
4.80/4.00-7	1	14.00-20	8
5.30/4.50-7	1	11.00-24	7
6.00-9	1	13.00-24	8
6.50-10	2	14.00-24	9
9.00-10	3	15.00-25	10
15.00-10	6	18.00-25	13
44.00/41.00-10	36	20.50-25	16
4.00-12	1	24.00-25	20
7.00-12	2	18.00-26	14
23.00/8.50-12	3	26.50-29	26
26.00/12.00-12	5	30.00-33	32
4.00-15	1	30.00-40	36
7.50-15	3	21.00-49	25
8.25-15	4
27.00/8.50-15	3
44.00/41.00-16	40
48.00/20.00-16	16
4.00-19	2
48.00/25.00-20	19
66.00/43.00-25	50
67.00/34.00-25	34

IMPORTANT:
High pressure, slow moving industrial tires frequently require larger quantities

Tractor and Implement Type Tire

Golf Carts and Trailers (For boats-Campers-utilities)

Size	Pints per tire	Size	Pints per tire
4.00-8	1	4.10/3.50-4	1
5.50-8	1	4.10/3.50-6	1
4.00-9	1	5.70/5.00-8	1
7.50-10	2	6.50-8	1
9.00-10	3	8.50-8	1
4.00-15	1	6.90/6.00-9	2
5.00-15	2	7.50/10	2
5.50-16	2	4.80/4.00-12	1
6.50-16	3	5.30/4.50-12	1
8.00-16	3	6.00-12	2
9.00-16	4
7.50-24	4
10.00-24	6
13.00-24	9
14.90/13.00-24	10
16.90/14.00-24	12
12.40/11.00-26	8
13.60/12.00-26	9
11.00-28	8
12.30/11.00-28	9
23.10/18.00-30	15
9.00-32	7
28.10-32	29
30.00-33	32
4.00-36	3
11.00-36	9
12.30/11.00-36	9
13.6/12-36	12
12.00-38	10
12.40/11.00-38	10
30.00-40	47
36.00-41	47
30.00-41	36

For tire sizes not shown, please write Texas Refinery for a more detailed list or use the following method of determining amount of TIRESEAL® or TIRESEAL®  II P.G. to be used: Measure circumference of outside of tire (in inches). Measure tire from bead to bead (in inches). Multiply circumference by bead-bead measurement. Divide answer by 144. Multiply answer by .25 to determine number of pints of TIRESEAL® or TIRESEAL®  II P.G. needed.

Each complete stroke of TIRESEAL® Pump puts a half-pint of the product into tire.
IMPORTANT: Powder sometimes found in tubeless tires, should be cleaned out before TIRESEAL® II P.G. or TIRESEAL II P.G. is applied. Do not inject regular TIRESEAL® orTIRESEAL® II P.G. into tires or tubes weighted with water. Remove water and then inject TIRESEAL® orTIRESEAL® II P.G. If weight is needed, add to the tire rims or use WATER TIRESEAL®.

Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).

TIRESEAL® is a registered trademark of Texas Refinery Corp.