SPECIAL UNIVERSAL OIL

QUALITY BASE OIL ANTI-WEAR AND SEAL PROTECTOR ADDITIVES RUST, OXIDATION, AND FOAM INHIBITORS SEPARATES FROM WATER VERSATILE CONSOLIDATES INVENTORY

SPECIAL UNIVERSAL OIL has a wide variety of uses and can help reduce inventory of various oils.

SPECIAL UNIVERSAL OIL is designed to meet a wide range of lubrication needs. It is designed and field tested to meet the demands of airline mist oil, drip oil, compressor oil, chain oil, form oil, spindle lubricant, hydraulic fluid, as well as many other applications. It is a non-detergent, general purpose fluid from quality base oils and quality additives.

Made From Quality Base Oil

Made from base oils of the highest quality. The base oils have been put through several refining steps to remove impurities. The solvent extraction process removes undesirable characteristics that might have otherwise led to sludge, gum, and varnish in high heat conditions. In addition, the base oils go through a hydro-treating process that improves the oil's oxidation resistance and its response to the high quality additives used by Texas Refinery Corp. SPECIAL UNIVERSAL OIL is available in a variety of weights and because of its multi-function capability, can reduce inventories and prevent getting the wrong oil in the wrong place.

Contains Anti-Wear and Seal Protector Additives

One of the quality additives used is the anti-wear package. It is a long-chemical-chain zinc compound capable of passing manufacturer's severe pump tests. The anti-wear package has proven itself to reduce the need for replacement parts under tough operating conditions. Cost savings are dramatic with the use of this anti-wear system. In addition, SPECIAL UNIVERSAL OIL protects seals. The oils contain seal protectors which are designed to control seal hardness and enable the seal to serve its function over greatly extended periods of time. Preservation of the seal means preventing oil loss. Equipment downtime to replace seals is greatly reduced.

Contains Rust, Oxidation, and Foam Inhibitors

Another part of the quality additive package deals with excellent rust and oxidation inhibitors. Since SPECIAL UNIVERSAL OIL has been hydro-treated, it responds very well to these high-quality additives and does a super job of preventing rust and the associated problems. It also prolongs the life of the oil by preventing oxidation which can then lead to sludge or varnish. This means extended drain intervals and reduced maintenance costs. Has approximately two and a half times the amount of anti-foam chemistry, determined as minimum standard to pass tests. Since the product doesn't foam, you can be assured of high-quality performance of your equipment under a wide variety of operating conditions.

Separates From Water

Does a superb job of separating from air (foam), water, and other contaminants. In the area of separation from water, the product is exceptional. This ability to separate from water is known as demulsibility. Since SPECIAL UNIVERSAL OIL is expected to give extended service life, it is important it does not retain water contacted through condensation, cooler leaks, or other sources. If it retained water, it could cause equipment damage through rust, and cause changes in the fluid characteristics of the oil. Fortunately, SPECIAL UNIVERSAL OIL has exceptional emulsion breaking characteristics. This is another example of the quality of the base oils and additives.

Versatile

Has a great many different types of applications. It can be used for everything from a general plant lubricant to very special needs. Actually the uses are limited only by your imagination. Some of the uses are oil mist systems, sight feed oilers, enclosed gears (non EP), circulating systems, machine tool lubrication, electric motors, high-speed spindles, as well as airline lubrication, drip oils, chain, and cable lubrication. Authorized by the U.S. Department of Agriculture as H2 lubricants which have no contact with food.

Consolidates Inventory

Has the ability to consolidate inventory because of its multi-function use. It can take the place of many oils in various applications. Customers enjoy reduced inventory as well as reduced confusion on which oil goes to what application. The economy of inventory consolidation is well known.

SPECIAL UNIVERSAL OIL

Product Code	#6805	#6810	#6862	#6820	#6830	#6840	#6850
ISO Number	22	32	46	68	100	150	220
Approx. SAE No.	5	10	15	20	30	40	50
Properties:
Gravity, API	30/32	30/32	31/32	29/31	28/30	28/30	27/29
Flash Point, 0F. COC, Min.	300	400	400	400	415	430	440
Fire Point, 0F. COC, Min.	320	430	440	440	450	470	480
Pour Point, 0F. COC, Max.	-20	0	+5	+5	+10	+10	+10
Viscosity, SUS at 1000F.	105	170	210	330	595	755	1150
Viscosity, SUS at 2100F.	38/41	43/47	47	53/58	65/69	74/78	95/99
Viscosity Index, Min.	95	95	95	95	95	95	95
Foam Test, after initial Blowing/5 Min. Settling, ml Sequence I Sequence II Sequence III	25/0 25/0 25/0	25/0 25/0 25/0	25/0 25/0 25/0	25/0 25/0 25/0	25/0 25/0 25/0	30/0 30/0 30/0	30/0  30/0 30/0
Conradson Carbon Residue Wt. % Max.	0.20	0.08	0.09	0.10	0.20	0.30	0.40
Sulfated Ash, Wt. %	0.12	0.12	0.12	0.12	0.12	0.12	0.12
Rust & Oxidation Inhibitors	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Demulsibility ASTM D-1401	Excellent	Excellent	Excellent	Excellent	Excellent	Excellent	Excellent