LIQUID AND SOLVENT CLEANERS

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
ASPHALT CLEANING SOLVENT	----------	Solvent	Amber	ACID	SOLVENT	OTHER	All
				---------	YES	Organic Solvents Penetrants

Description: An excellent solvent for removing asphaltic soils. It has three to five times the solvent action of common solvents like kerosene or mineral spirits.

Directions Soak tanks for heavy soils: Warm Asphalt Cleaning Solvent to maximum of 130 deg F. Do not raise

For Use: above this temperature. For large parts, brush or wipe the surface to be cleaned. Can be mixed with

SUPER BIG RED® or WED-129 as a solvent emulsifier system.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
Big Red ®	8.9	Wetting	Red	ACID	SOLVENT	OTHER	All
				---------	----------------	Synthetic Detergents Emulsifying Agents Wetting agents Sequestering Agents

Description: An incredibly versatile biodegradable cleaner. BIG RED ® can be used anywhere water can be used for

cleaning. A powerful cleaner, but yet gentle for employees to use. Multi-functional - - can be mixed

with solvents when needed.

Directions STEAM CLEANING: 1 part BIG RED ® to 35 or more parts water. Apply Big Red ®, use brush if

For Use: needed and allow to soak 5 to 10 minutes.

FLOORS AND WALLS REGULAR MAINTENANCE: 2/3 ounce to 1 gallon water.

STEAM CLEANING: 1-4 ounces per gallon water.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
BIO-KLEAN	6-8 at 1%	Emulsion	Straw	ACID	SOLVENT	OTHER	All
				---------	Water Soluble	Emulsifiers Citrus Fragrance

Description: A powerful natural degreaser and deodorizer. This multi-purpose concentrate instantly emulsifies grease

oil and fats without the use of harsh alkalis or petroleum solvents.

Directions SURFACE DEGREASING: 2-4 parts BIO-KLEAN to 100 parts water. Apply by brushing, mopping or

For use: spraying. Let solution stand for 5 minutes. Rinse.

DRAIN CLEANER: Pour 5-8 ounces BIO-KLEAN directly into drain clogged from grease and oil. Let

stand for 1-2 hours. Rinse with warm water.

 

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
BRIGHTENER B	2	Chemical Etching	Red	ACID	SOLVENT	OTHER	Aluminum & Steel
				Yes	Water Soluble	Inorganic Acid Solvent Surface Active Agent

Description: Designed to remove oxidation, dirt and road film from aluminum surfaces such as aluminum trailers.

Can also be used to remove light oil and rust from steel surfaces while leaving a light phosphate coating

that provides an excellent paint ponding surface.

Directions CLEANING & BRIGHTENING ALUMINUM: Dilute BRIGHTENER B at a ratio of 1 part to 4 parts

For Use: water. Apply through pressure washer or manually with a brush. Thoroughly rinse water to prevent

streaking.

HAZARDOUS SHIPPING, CORROSIVE, ACID

CAUTION: POUR ACID INTO WATER. DON'T POUR WATER INTO ACID

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
CR-140	11.2	Solvent	Amber	ACID	SOLVENT	OTHER	All except Aluminum
				---------	YES	Chlorinated Solvents Phenolic Compounds Emulsifiers Wetting Agents

Description: A two phase liquid. The bottom layer removes light carbon deposits, shellac, oil, grease and paint from

ferrous and non-ferrous metals. The top layer is an alkaline solution containing a special corrosion

inhibitor and helps seal the solvents from excessive evaporation. (Do not use on Aluminum)

Directions Agitate before removing from container. Lay drum on side and roll around for a few minutes. Pour into

For Use: cold vat. Immerse parts in vat for cleaning. Following cleaning, thoroughly rinse the parts with solvent

or water before handling.

HAZARDOUS SHIPPING, CORROSIVE

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
FLEET KLEEN	10.5	Wetting	Deep Blue	ACID	SOLVENT	OTHER	All
				---------	----------------	Detergents Wetting Agents Water Conditioners

Description: A fast acting liquid detergent that rapidly penetrates and disperses road film, dirt and grime from all hard

surfaces. Used in pressure spray equipment or used manually. Economical—can be diluted up to 1:150

in soft waters.

Directions HIGH PRESSURE WASHING: DIRECT CHEMICAL INJECTION: ratio of 1:50 for most applications.

For Use: SOFT WATER: Ratio up to 1:150. If a chemical concentrate tank is used, mix 1 gallon to 5 gallons

water. Then meter this mixture at a ratio between 1:10 and 1:30.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
NEW ONE-ELEVEN	12.5-13	Wetting	Deep Red	ACID	SOLVENT	OTHER	All
				----------	Water Soluble	Synthetic Detergents Wetting Agents Penetrating Agents Emulsifying Agents

Description: A multipurpose degreaser for effective removal of all soils. It is especially compounded to remove oils

and greases not normally removed by products of this nature. Excellent cleaning agent for pressure

washers and steam cleaners.

Directions GENERAL PURPOSE: 2 to 6 ounces NEW ONE-ELEVEN per gallon of water. COLD AND HOT

For Use: VATS: a 1 to 20 mixture (agitation is recommended). STEAM CLEANING: 1 part NEW ONE-

ELEVEN to 25 to 75 parts water. EQUIPMENT CLEANER: 4 ounces to 1 gallon water. Soak then

rinse.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
PWC (PARTS WASH CLEANER)	----------	Solvent	Blue	ACID	SOLVENT	OTHER	All
				---------	Yes	Aliphatic Solvents Select Oils Penetrants

Description: Designed as a part washer cleaner. PWC floats on water. Cleans faster than kerosene, naptha or diesel

fuel. Leaves less residue. Removes common soils on automotive parts and industrial equipment. Ready

to use straight from drum.

Directions PWC is ready to use straight from the drum. Although designed for use in part washers, PWC works

For Use: equally well in manual cleaning operations or it may be applied by spray or brush for cleaning larger

parts.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
R-307	1.5-2.5	Chemical Etching	Medium to Dark Amber	ACID	SOLVENT	OTHER	Ferrous
				Yes	----------------	Acids Emulsifiers Wetting Agents Inhibitors

Description: A combination of acids, emulsifiers, wetting agents and inhibitors. Designed to penetrate and remove

concrete and mortar from most painted and many metal surfaces, especially ready-mix trucks.

Directions Dilute R-307 with up to 5 parts or more of water. Apply diluted solution with acid resistant brush, swab

For Use: or sprayer. Allow R-307 to penetrate the concrete for 5 to 10 minutes. Rinse off loosened deposits with

water from a hose.

HAZARDOUS SHIPPING, CORROSIVE, ACID

CAUTION: POUR ACID INTO WATER.  DON'T POUR WATER INTO ACID

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
RED HOT	13-13.5	Saponifying	Deep Red	ACID	SOLVENT	OTHER	Ferrous Do Not Use On Aluminum
				----------	Water Soluble	Alkaline Builders Three Wetting Agents Water Conditioners

Description: A heavy duty, highly concentrated liquid degreaser that quickly penetrates and disperses stubborn soils,

petroleum based muds and greases from oil rigs and off-road industrial equipment. Great in pressure

washers and steam cleaners. Safe on quality paint at ratios above 1:40.

Directions PRESSURE WASHERS: Metering system should be set to deliver from a 1:10 to a 1:60 dilution

For Use: depending on soil.

PRECLEAN: Spray 1:10 ratio. Allow to soak. Pressure rinse clean.

COLD SOAK VAT: Full strength. Grease, oil and most paints stripped.

HAZARDOUS SHIPPING CORROSIVE

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
SAFETY SOLVENT	---------	Solvent	Clear	ACID	SOLVENT	OTHER	All
				----------	YES	Aliphatic Chlorinated

Description: A combination of Aliphatic and chlorinated solvents with excellent solvent action. Removes petroleum

tar, wax. Can be used on electric motors. Higher flash point than most solvents.

Directions Use in ventilated area.

For Use: ELECTRIC MOTORS: Turn off motor. Spray electric motor for best cleaning. It moderately evaporates.

OTHER USES: Spray on wipe to clean parking meters, painted circuits, clocks, instrument parts.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
SEVEN ELEVEN	9.5	Wetting	Amber	ACID	SOLVENT	OTHER	All
				----------	-----------------	Synthetic Detergents Wetting Agents Coupling Agents Water Softeners

Description: A multipurpose cleaning agent to be used on painted surfaces, floors, walls, equipment and other

surfaces where water is safely used. It eliminates solvent degreasing in many operations. Manually

or pressure sprayer.

Directions FLOOR&WALLS: 1 to 2 oz. Per gallon. Mop or wipe on. Allow to penetrate. Remove with damp

For Use: mop or rag.

EQUIPMENT: 4 oz. Per gallon. Apply and allow to penetrate then rinse. Can also be mixed with

solvents such as kerosene or diesel fuel.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
SUPER BIG RED ®	12.9	Wetting	Florescent Pink	ACID	SOLVENT	OTHER	ALL
				----------	Water Soluble	Detergents Wetting Agents Water Softeners Alkaline Builders

Description: Highly concentrated cleaner designed to be very economical. Extremely versatile - - minimizes the

number of cleaning products needed for use.

Directions DEGREASING EQUIPMENT: Dilute 1 part SUPER BIG RED® with 5 parts solvent. Apply and allow

For Use: to soak 5-10 minutes.

CAR WASHING: 1 ounce SUPER BIG RED® to 1 gallon of water.

FLOORS, WALLS, ETC: 1 ounce SUPER BIG RED® to 1 gallon of water.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
TUFF STUFF	12.5	Wetting	Dark Peach	ACID	SOLVENT	OTHER	ALL
				----------	Water Soluble	Detergent Degreaser Wetting Agents

Description: A concentrated steam cleaning and pressure washing compound. Very effective cleaner for trucks,

equipment, off-road vehicles, rigs, floors, etc. Stout alkaline builders are present to give TUFF STUFF

the extra “bite” needed in removing grease and grime.

Directions PRESSURE WASHING OR STEAM CLEANING: Dilute at rate of 1:10 to 1:60 depending on severity

For Use: of soil. GARDEN SPRAYER OR BRUSH: Dilute at rate of 1:5 ratio. COLD DEGREASER: Full

strength.

NAME	PH	ACTION	COLOR	CONTAINS			FOR METALS
WED-129	12.9	Wetting	Florescent Pink	ACID	SOLVENT	OTHER	Ferrous Non-Ferrous at diluted ratios
				----------	Water Soluble	Detergent Wetting Agents Water Softeners Alkaline Builders

Description: A popular and versatile liquid detergent that is effective on food greases, petroleum soils or just plain

dirt. Use in pressure washers, steam cleaners or manual cleaning operations. No free caustic so it is safe

for ferrous and nonferrous metals, rubber, vinyl, most paints and plastics.

Directions PRESSURE WASHING: Meter direct from container at 1:20 to 1:150 or with chemical concentrate

For Use: tank 1-2 gallons to 5 gallons water, then meter this mixture at 1:10 to 1:30 ratio.

MANUAL: Light – 1-3 oz. per gallon. Medium to heavy – 3-6 oz. per gallon.