DESCRIPTION:

BRIGHTENER B is a red liquid with a pleasant solvent aroma. Composed of an inorganic acid, a water soluble solvent, and a surface active agent, it has a pH of approximately 2.0.


PURPOSE:

BRIGHTENER B is designed for two basic purposes:
1. To remove oxidation, dirt and road film from aluminum surfaces such as aluminum trailers.
2. To remove light oil and rust from steel surfaces while leaving a light phosphate coating that provides an excellent paint bonding surface.


DIRECTIONS FOR USE:

1. CLEANING and BRIGHTENING: Dilute BRIGHTENER B at a ratio of 1 part to 4 parts water. Apply through pressure spray equipment or manually with a brush. Thoroughly rinsing with water is necessary to prevent streaking.
2. PREPARING STEEL SURFACES FOR PAINTING: Dilute BRIGHTENER B as above. This removes light oil and normal dirt on the steel surface. A spray or vat application can be used for this purpose. If heat is applied, a stainless steel vat should be used. Agitation, manually or mechanically, speeds the cleaning and improves the phosphate coating for paint bonding. Follow with a water rinse or wipe dry with a cloth.


ADVANTAGES:

1. Completely soluble liquid - mixes instantly with water.
2. Economical concentrate - dilute with water to use.
3. Free Rinsing - leaves no scum or chemical spotting.
4. Controlled action - contains no hydrofluoric acid.

DANGER: CORROSIVE

CAN CAUSE EYE AND SKIN BURNS
Contains phosphoric acid and 2-butoxyethanol. Avoid skin, eye, or clothing contact. Mist may be irritating. Use with adequate ventilation. Keep container closed when not in use. Wash thoroughly after handling. Safety glasses with side shields and rubber gloves are recommended when handling. Always add acid compounds to water and pour slowly to avoid splattering. Eyewash fountains in the workplace are strongly recommended. Store away from strong caustic compounds and metals.

EYE CONTACT: Immediately flush with plenty of cool water for at least 15 minutes. Washing eyes within one minute is essential to achieve maximum effectiveness. SEEK IMMEDIATE MEDICAL ATTENTION.

SKIN CONTACT: Immediately wash contaminated areas with soap and large quantities of cool water. Remove contaminated clothing and shoes. SEEK MEDICAL ASSISTANCE IMMEDIATELY. If irritation persists, consult a doctor. Discard non-rubber shoes and wash clothing before reuse.

INGESTION: NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. DO NOT INDUCE VOMITING. Give large quantities of water or milk. If vomiting occurs spontaneously, keep airway clear. SEEK MEDICAL ATTENTION IMMEDIATELY.

INHALATION: Remove to fresh air. SEEK IMMEDIATE MEDICAL ATTENTION. Consult MSDS for more detailed information on the safe handling of this product.

FOR COMMERCIAL OR INDUSTRIAL USE ONLY!

KEEP OUT OF THE REACH OF CHILDREN!

Warranty and Liability Disclaimer
The above information and recommendations concerning this product are based upon laboratory tests and field use experience; however, since conditions of actual use are beyond our control, any recommendations are made without warranty, expressed or implied. Manufacturer's and seller's sole obligation shall be to replaced the portion of the product shown to be defective. Neither shall be liable for any loss, damage or injury, direct or consequential, arising out of the use of this product.